STS Offers:
Thermal Process Solutions Industrial Heating Applications Heating Elements, System Controls CCR #: 569T64
Ceramic Strip Heaters
Options
Specifications
Ceramic Strip Heaters
SOME TYPICAL APPLICATIONS • Thermoforming • Air Heating • Platens • Molds
• Ovens • Sealing • Dies • Tank Heaters • Hot Plates
SPECIFICATIONS ELEMENT - Nickel/Chrome Coil SHEATH - Stainless Steel(Heavy Gauge) THICKNESS - 1/4"-5/16"-3/8" TEMPERATURES - Up to 1400 deg.F
WATT DENSITY - Up to 45 watts/square inch VOLTAGE - Up to 240 volts - Consult factory for higher voltage TERMINALS - Post Type-Standard 10-24 Thread LENGTH - Minimum 4" up to any practical length MOUNTING TABS - Available with or without tabs MOUNTING SLOTS - 5/16" X 1/2"
Southeast Thermal Systems LLC, Charlotte, North Carolina 28216
sales@se-thermal-systems.com
Phone: (704) -399-1248
Fax: (704)-399-4167
OPTIONS LEADS - Off top surface or from end
LEADS - in braid or armor
POST TERM - 2 on 1 end - 1 on each end
TERM BOX CERAMIC
TERMINAL COVERS
Others sizes available.
Please consult factory with your requirements. Radiant Panels incorporating these heaters can be customer manufactured. Please consult factory.
All Heaters Available with Leads Out End,
One Each End, or Leads Off Top Surface.
Styles PT-P and PT_O Available in 1-1/2"
Width Only. Thicknes Tolerance ±.005"
HOW TO ORDER -SPECIFY:
With or without mounting tabs;
A-B-C dimensions; 1" width specify 1/4" or
5/16" thick; 1-1/2" width specify 5/16 or
3/8" thick;
If post terminal choose style If leads choose
location; Add any options required.
Southeast Thermal Systems LLC, Charlotte, North Carolina 28216
sales@se-thermal-systems.com
Phone: (704) -399-1248
Fax: (704)-399-4167
Ceramic Strip Heaters
SOME TYPICAL APPLICATIONS • Thermoforming • Air Heating • Platens • Molds
• Ovens • Sealing • Dies • Tank Heaters • Hot Plates
SPECIFICATIONS
ELEMENT - Nickel/Chrome Coil SHEATH - Stainless Steel(Heavy Gauge) THICKNESS - 1/4"-5/16"-3/8" TEMPERATURES - Up to 1400 deg.F
WATT DENSITY - Up to 45 watts/square inch VOLTAGE - Up to 240 volts - Consult factory for higher voltage TERMINALS - Post Type-Standard 10-24 Thread LENGTH - Minimum 4" up to any practical length MOUNTING TABS - Available with or without tabs MOUNTING SLOTS - 5/16" X 1/2"
4 SIZES AVAILABLE
¼" x 1"
5/16" x 1"
5/16" x 1-1/2"
3/8 x 1-1/2"
Southeast Thermal Systems LLC, Charlotte, North Carolina 28216
sales@se-thermal-systems.com
Phone: (704) -399-4248
Fax: (704)-399-4167
