Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

 

 

 


STS Offers:
Thermal Process Solutions
Industrial Heating Applications
Heating Elements, System Controls
CCR #: 569T64

dcmcv

 


<<Cartridge Heaters

a

Flanged Cartridge Heaters
Cartridge heaters can be manufactured with flanged located at any point along sheath with adequate unheated area. Type W flanged can also be attached to Fig. U unheated section on stock items.

 

* Standard cold sections can be reduced or increased
Diameter Minimum Unheated*
Fig. 1B Fig. 1C
1/4" 1/8" 1/8"
3/8" 7/8" 7/8"
1/2" 7/8" 7/8"
5/8" 7/8" 7/8"
3/4" & larger 7/8" 7/8"

 

Diameter A B Cable O.D.
1/4" 3/4" 7/8" 1/4"
3/8" 3/4" 15/16" 3/8"
1/2" 1" 1-3/16" 3/8"
5/8" 1-1/16" 1-7/16" 1/2"
3/4" & larger 1-5/16" 1-7/8" 1/2"
.
Additional Variations

Special Wattage Distribution. Specify percentage of overall wattage and length for each section. Typically, the entire lenght is divided into thirds with the overall wattage split into the following percentages: 40% at lead and bottom third of length with 20% in the middle, or, 35% at lead and bottom third of length with 30% in the middle.

 
a Fiberglass Sleeving
a Teflon® Sleeving
a Formed­Consult Ogden
a Centerless Grinding of Sheath to Precision Diameter
a Passivation
a Special Unheated Area
a Ground Lead
a Ceramic Bead Insulation
a Built-in Thermostat or Thermal-Fuse

<<Cartridge Heaters