HA930/430 Series
The HA930/430 Series strain gauge input make it ideal for melt pressure control.
Featuring high speed sampling and control at 0.025 seconds (40Hz), PID parameters set in 1/100 unit, these controllers provide stable control for improved quality of extruded products.

CZ-200P
CZ-GP100

  Download Specifications

Resin pressure control application

A strain gauge-type pressure sensor made in other companies is connectable.

Ultra high speed sampling 0.025 sec
The digital PID controller HA930, HA430 realizes 40 times of feedback control in one second and can respond to fast pressure control system of responsibility.
Of course we did not speed up only sampling period simply. It should support a high-speed response and, in a setting category of integral value (I) of a PID parameter and derivative (D), is as "0.0 to 3600.0 sec" or "0.00 to 360.00 sec".

Inside calculation Measurement Control output

Pressure and Temperature control
with a single instrument
The HA930 and HA430 provides dual loop control with a single instrument. The first loop is assigned to a strain gauge input and the second loop to a temperature input (T/C, RTD, and mV/V/mA).

1 ch
				Pressure control output
Strain gauge pressure sensor
2 ch
				Temperature control output
Temperature sensor

7 inputs and 5 outputs
A maximum of two measured inputs and five event inputs can be specified. A maximum of five outputs can be specified, and various output functions (control output, analog retransmission, event up to 4) can be allocated in output logic operation.

CH1		Event output ; Deviation High, Low, High-Low Process High, Low Deviation Band Loop break alarm		DO1
Pressure input				Control output of CH1
CH2				DO2
Temperature input or Voltage, Current input				Control output of CH2 Event output 3, 4 Analog retransmission output
DI1 - DI5				DO3
Area change Run / Stop Remote / Local Auto / Manual Hold / Reset Interlock reset Motor speed of rotation Up / Down Forced reset				Event output 2,3, 4 Analog retransmission output
				DO4
				Event output 1, 2, 3
				DO5
				Event output 1, 2 FAIL

Communications
Communication function can be selected from serial communication (RS-232C, RS-422A, RS-485) and Open network (DeviceNet, PROFIBUS).

MODBUS, RKC standard protocol (RS-232C/422A/485) Open network (DeviceNet, PROFIBUS)

A communication port is a single. (Specify communication type when ordering.)