|
STS Offers:
Thermal Process Solutions
Industrial Heating Applications
Heating Elements, System Controls
CCR #: 569T64
|
   |
|
- Hot Water units
- Hot Oil Units
- Portable Chiller Units
FLUID HEAT TRANSFER SYSTEMS
ISO 9001:2008 - ANSI/ISO/ASQ Q9001-2008
Hot Water Units 
|
|
Mini BTU Mold Temperature Controller
Budzar Industries Mini BTU Mold Temperature Controller Portable Hot Water
System delivers full temperature control. At 11” wide, 22 ” high and 21” long the
Mini BTU is perfect for any industry process: rubber, plastics, pharmaceutical,
chemical, power, steel petroleum or food requiring a reliable temperature control unit with a small footprint.
 Mini BTU Mold Data sheet download
|
|
|
Mold Temperature Controller
Unmatched reliability and power come to the production process through full feature temperature control in the smallest, best performing, best priced cabinet on the market, in its performance range. Optimize your injection molding and operation productivity with these Budzar Industries Mold Temperature Controllers, featuring total temperature control.
Mold Temperature Data sheet download |
| 
|
Negative Pressure Hot Water Unit
With Budzar Industries Thermal VAC control units production will never have to stop because the process develops a leak. An on-board vacuum pump draws heat transfer fluid through the mold rather than force it through the process with pressure-like conventional temperature control units.
Negative Pressure Data sheet download |
|
Multi-Zone Hot Water Unit
Quick Change Sliding Tray Unit
Budzar Industries Multi-Zone Temperature Control Units provide up to eight independent zone of temperature control, each with its own controls, pump, heater and cooling mode.
Multi Zone Sliding Tray Unit Data sheet download |
|
Multi-Zone Hot Water Unit
Budzar Industries Multi-Zone Hot Water Units provide up to six independent zone of temperature control, each with its own controls, pumps, heaters and cooling modes. Independent zone control maximizes production by operating each zone at independent set points. Budzar Industries Multi-Zone Hot Water unit is available for use with plant steam or electricity as the heat source.
Multi Zone Hot Water Unit Data sheet download |
|
Mixer Temperature Control
Hot Water Unit
Budzar Industries Mixer Temperature Control Hot Water Unit offers multi-zone fluid heat transfer capability for high velocity, controlled-temperature water to mixer sides, rotor and drop door.
Mixer Temperature Control Hot Water Data sheet download |
 |
High Volume Hot Water Unit
Budzar Industries High Volume Hot Water Units are engineered to provide accurate, reliable and cost effective temperature control for a company’s mill, calender, reactor or any other high capacity process load.
High Volume Hot Water unit Data sheet download
|
 |
Temperature Control Unit
Budzar Industries Temperature Control Modules have a temperature range of -100º to 700ºF. With simple and easy to understand controls and a premium on operator safety, the temperature Control Modules will stand the test of time
Temperature Control Unitt Data sheet download
|
 |
Clean-In-Place (CIP) Systems
Clean-In-Place (CIP) Systems offer important advantages to processing facilities, from efficient, reliable and repeatable cleaning of process equipment and piping at lower costs to improved product quality. The sanitary design of the Budzar Industries CIP system tanks, pumps, heaters, valves and orbital welding ensures the integrity of the equipment and cleaning process. |
 |
Director Series Reactor Temperature Control Module
The Budzar Industries Director Series Reactor Temperature Control Module with environmentally friendly refrigerant achieves a temperature range of -80° to +285° C and is suitable for applications requiring a wide range of heating and cooling applications with a single heat transfer fluid.
Director Series Data sheet download |
Hot Oil Units
|
 |
BWA High Temperature Portable Hot Oil Units
For over 30 years, Budzar Industries has been an innovative leader in the engineering and design of temperature control systems for the process industries. Budzar Industries has taken this expertise one step further, resulting in the culmination of the Budzar World Alliance (BWA). Created from Budzar Industries specialized engineering, design service, local support and worldwide manufacturers, BWA offers portable temperature control systems that deliver the qualities you require in a product: maximum value, backed by Budzar Industries reliability and functionality
|
|
 |
Silver Series Portable Hot Oil Unit
Budzar Industries Silver Series Portable Hot Oil unit with a maximum temperature of 650°F, easy to use and understand controls and a premium on operator safety will stand the test of time.
Silver Series Hot Oil Unit Data sheet download |
|
|
Negative Pressure Hot Oil Unit
With Budzar Industries Thermal VAC control units production will never have to stop because the process develops a leak. An on-board vacuum pump draws heat transfer fluid through the mold rather than force it through the process with pressure-like conventional temperature control units.
Negative Pressure Data sheet download |
|
Custom Portable Hot Oil Unit
Budzar OTP Series Portable Hot Oil Units are engineered for high operating temperature applications. The GOL Series is capable of oil temperatures up to 450°F. The GOM Series operates up to 550°F and the GOH Series operates up to 650°F.
Custom Portable Hot Oil Unit Data sheet download |
 |
Stationary Hot Oil
Budzar Industries Stationary OTS Hot Oil unit is ideal for those applications requiring a dedicated source of high temperature fluid in capacities beyond the capabilities of a portable model. Budzar Industries OTS Series is designed for a high degree of compatibility with typical process applications and a high degree of safety. Standard units are available for industrial processes requiring fluid temperature up to 450°F, 550°F and 650°F.
Stationary Hot Oil Data sheet download |
 |
Mixer Oil Weigh Unit
Deliver fast, automatic oil weighing and feeding into intensive mixers with high precision, low maintenance and reliable operation along with volumes of other advantages
Mixer Oil Weigh Unit Data sheet download |
 |
Lubricating Oil Unit
Budzar Industries LOS Series Lubricating Oil Systems may be equipped with for either an air or water cooled module complete with reservoir, pump, filter and oil cooler with a capacity range from 1 to 30 GPM.
Lubricating Oil Unit Data sheet download |
 |
Intensive Mixer Dust Stop Seal Oil Recovery System Unit
The dust stop recovery system keep the rubber mixing area clean and saves money by recoverying and reusing dust stop seal oil that drains from the rubber intensive mixer. A hopper built into the recovery system collects dust stop seal oil. The dust stop seal oil is filtered and pumped back to the intensive mixer for reuse. The hopper, pump, valves and pipe are heated to keep the oil fluid and pump able. Automatic controls pump the recovered oil back to the mixer or recirculate it within the recovery system for later use.
Mixer Seal Oil Recovery Unit
Conserve valuable resources and eliminate costly waste oil collection and disposal by capturing seal oil for the intesive mixer filtering it and injecting it for reuse.
Intensive Mixer Dust stop Seal Oil Data sheet download |
| |
Director Series Reactor Temperature Control Module
The Budzar Industries Director Series Reactor Temperature Control Module with environmentally friendly refrigerant achieves a temperature range of -80° to +285° C and is suitable for applications requiring a wide range of heating and cooling applications with a single heat transfer fluid.
Director Series Data sheet download |
 |
Nuclear Power Plant Lube Oil Cooling System
The Budzar Industries Lube Oil Cooling System for Nuclear Power Plants has a total heat transfer of 23,000,000 btu/hr and a temperature range of 40 - 230°F. The Dual Plate and Frame exchanger which can be completely cleaned in place in four hours features stainless steel plates, carbon steel fittings and 12" connections capable of handling 150 pounds of pressure
Nuclear Lube Oil Cooling System Data sheet download |
Portable Chiller Units |
Budzar World Alliance Portable Chillers
The Budzar World Alliance (BWA) Industrial Portable Air Cooled Chillers utilized mainly for injection molding are off the shelf, built for top performance and are ideally suited for all plant environments and industrial processes. The BWA Portable Chillers are designed to circulate a fluid medium for continuous process cooling between 42° to 65°F. The Budzar World Alliance Portable Air Cooled Chiller System is constructed with proven standard components such as a Copeland Scroll Compressor, Hirshman Hot Gas By-Pass Valve and Liquid Line Solenoid Valve, Alco Thermal Expansion Valve, along with a Non-Proprietary Controller. Other construction elements include Separate High and Low Refrigeration Liquid-Filled Pressure Gauges, Automatic Fill Valve, Oversized Air Cooled Condenser for Low Head Pressure and Capacity, High and Low Pressure Switches, Phase Monitor and an Adjustable Freezestat Switch. The Budzar World Alliance Portable Chillers with Copper Tubing on all Instruments and Gauges and Heavy-Duty Powder-Coated Cabinet are engineered and designed for durability and to stand the test of time. The Budzar World Alliance Process Chillers are built with large industrial casters for durability and are easily moved between industrial process applications. The BWA Portable Water Cooled Chillers which are in-stock and ready to ship are available in capacities from 3 to 40 tons with either 230 or 460 voltage. The Budzar World Alliance Air Cooled Chiller uses ambient air to dissipate process heat. The BWA Portable Air Cooled Chillers will not operate in ambient conditions under 60°F. BWA Chiller Chart
|
 |
 |
BWA Portable Air Cooled Chillers
|
BWA Portable Water Cooled Chillers
|
|
| |
Budzar Industries Portable Chillers
Budzar Industries Portable Chillers with a Programmable Logic Controllers are designed
to circulate a fluid medium between 20° - 70°F and are built to take the heat in an industrial
duty application. The Air Cooled Portable Chillers features top quality non-proprietary components that will stand up to the process and plant environment. Each Industrial Portable Air Cooled Chiller is factory tested prior to shipping to ensure top quality. Portable Air/Water Chiller Data Sheet
|
 |
 |
Portable Air Cooled Chillers |
Portable Water Cooled Chillers |
|
|
